This is an old revision of the document!
and upload the code to the RoboCORE board?
You have a few possibilities to develop your software on RoboCORE. This is a short guide.
Online development | Offline development | |
---|---|---|
Husarion_Cloud | USB bootloader | st-link debugger |
This is a easiest way to start working with RoboCORE.
You need an Internet-enabled device to connect RoboCORE with the Platform. This can be:
You don't need any programming device, just use the USB cable.
This is the only way to access hardware debugging possibility. Recommended for advanced users.