User Tools

Site Tools


robocore:hardware:modules

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
robocore:hardware:modules [2015/11/05 08:32]
radekj
robocore:hardware:modules [2017/03/07 19:25]
zielmicha ↷ Links adapted because of a move operation
Line 1: Line 1:
 ===== Add-on modules for RoboCORE ===== ===== Add-on modules for RoboCORE =====
  
-This article describes official modules for [[basics|RoboCORE]]manufactured by [[Husarion]]. +This article describes official modules for [[robocore:basics|RoboCORE]]. Most of them are manufactured by [[robocore:​husarion]].  
 + 
 +==== Intel® Edison ==== 
 + 
 +[[robocore:​edison:​start|Intel® Edison]] is an embedded Linux computer which can be inserted in RoboCORE wireless module. You will find more about Intel® Edison on its individual [[robocore:​edison:​start|page.]]\\ 
 + 
 +[[robocore:​edison:​start|{{robocore:​edison:​edison.jpg?​400|}}]]
  
 ==== Servo driver ==== ==== Servo driver ====
  
-External [[hardware:​servodriver|servo driver]] that can be connected to the hExt port in RoboCORE. It drives up to 12 servos. +External [[robocore:hardware:​servodriver|servo driver]] that can be connected to the hExt port in RoboCORE. It drives up to 12 servos. ​You will find more about servo driver on its individual [[robocore:​hardware:​servodriver|page.]]\\ 
-{{:​hardware:​servo_driver_perspective_small.jpg?450|}}+\\ 
 +[[robocore:​hardware:​servodriver|{{robocore:hardware:servo_driver_perspective2_small.jpg?450|}}]] 
 + 
 +==== MPU-9250 orientation sensor ==== 
 + 
 +This sensor has 9 DOF (Degrees Of Freedom): 3-axis accelerometer,​ 3-axis gyroscope and 3-axis magnetometer. It allows to measure absolute position of any object. 
 + 
 +It only works with two of hSensor ports: hSens1 and hSens2. 
 + 
 +{{robocore:​hardware:​mpu.jpg?​nolink|}} 
 + 
 + 
 +==== Power motor driver ==== 
 + 
 +External [[robocore:​hardware:​motordriver|power motor driver]] that can be connected to the hMotor port in RoboCORE. It drives one DC motor. You will find more about power motor driver on its individual [[robocore:​hardware:​motordriver|page.]]\\ 
 +\\ 
 + 
 +[[robocore:​hardware:​motordriver|{{robocore:​hardware:​ogolne3.jpg?​600|}}]]
robocore/hardware/modules.txt · Last modified: 2017/09/28 14:37 by hubert