User Tools

Site Tools


robocore:hardware:hext

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
robocore:hardware:hext [2017/09/28 15:02]
hubert
robocore:hardware:hext [2017/09/28 16:20] (current)
hubert
Line 5: Line 5:
 RoboCORE is equipped with two hExt ports. RoboCORE is equipped with two hExt ports.
  
-hExt is a universal expansion port which contains some GPIO pins and some communication interfaces. The purpose of this port is to provide the possibility to communicate with plenty of electronic modules, (e.g. with the [[robocore:​hardware:​hservodriver|servo driver]] which is available for RoboCORE).+hExt is a universal expansion port which contains some GPIO pins and some communication interfaces. The purpose of this port is to provide the possibility to communicate with plenty of electronic modules, (e.g. with the [[robocore:​hardware:​servodriver|servo driver]] which is available for RoboCORE).
  
 Each hExt port contains: Each hExt port contains:
robocore/hardware/hext.txt · Last modified: 2017/09/28 16:20 by hubert