RoboCORE is a cloud-powered device and development platform that is the heart of your new DIY robots for professional or hobby use.
You can now build personal robots from scratch without high programming skills and at an affordable price. RoboCORE gives you the hardware and software to build almost any robot you can imagine. What's more, it’s not dependent on any particular mechanics system, so you can use simple metal constructions, as well as LEGO® bricks.
You can also connect your smartphone or USB camera to RoboCORE in order to unlock some cool telepresence features. RoboCORE is not just a driver, it’s a whole ecosystem. It allows you to create advanced constructions for anyone. Stretch your brain cells, develop the passion and discover the new opportunities. You’ve got your own personal computer, now it’s time for your personal robot. Share our passion for robotics!
|Microcontroller||32-bit Cortex-M4, 168MHz, 1MB Flash, 192KB RAM, 210DMIPS|
|Supply voltage||6 - 16V|
|Dimensions||126 x 114 x 27mm (with casing)|
|Output ports type||6 hMotor outputs with H-bridges and quadrature encoder interface|
|Output ports parameters||1A average current, 2A peak current, PWM 100…22000Hz|
|Input ports type||5 hSensor inputs with 2x GPIO + ADC + ext. interrupt input|
|Input ports parameters||3.3V/5V tolerant GPIOs, 12-bit ADC, 5V output for sensor supply|
|Extension ports||2 hExt ports with GPIO, ADC, SPI, I2C and USART interfaces|
|Connectivity||CAN, USB Full Speed Host, Serial port with FTDI and micro USB connector, microSD card slot, SWD debugger interface|
|Connectivity with Intel Edison||the same as above + Wi-Fi + Bluetooth + USB 2.0 Host + audio output|
Our hardware was designed to:
There are many different scenarios for using RoboCORE – building telepresence robots, driving, swimming or manufacturing devices.
See also our Kickstarter campaign page:
RoboCORE: the heart of your personal robot